Consumer Product Safety Commission recalls

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The oven of the gas ranges can emit dangerous levels of carbon monoxide (CO) while in use, posing a serious risk of injury or death from carbon monoxide poisoning.

The product can combust while lit causing the glass container to break, posing fire and injury hazards.

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The children's pajama sets fail to meet flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The gas hose can come into contact with the heat shield, melting the hose and igniting the fire table, posing a fire hazard.

The children's robes fail to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The hot chocolate pots are mislabeled as microwave safe. If microwaved, the metallic paint on the pots can spark, posing a fire hazard.

The recalled helmets do not comply with the positional stability and retention system requirements of the U.S. CPSC federal safety standard for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury. 

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled children's sleepwear fails to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled headlight sealant contains low-viscosity hydrocarbons which must be in child resistant packaging as required by the Poison Prevention Packaging Act (PPPA). The packaging for the products does not meet federal child resistant packaging requirements, posing a risk of poisoning if the contents are swallowed by young children.

The tilt latch can cause the window opening control devices to malfunction, posing fall and serious injury hazards.

The TV can become unstable while on the assembled stand, posing serious tip-over and entrapment hazards that can result in injuries or death to children and others. 

The circuit board inside the vacuum's battery pack can overheat and smoke, posing a fire hazard.

The vehicle's intake funnel band screw can loosen and enter the engine through the intake funnel and cause sudden engine failure. If this occurs, it can result in a loss of control, increasing the risk of a crash or injury.

Infant fatalities have occurred in the Rock ‘n Play Sleepers, after the infants rolled from their back to their stomach or side while unrestrained, or under other circumstances.

Infant fatalities have occurred in the Rocking Sleepers, after the infants rolled from their back to their stomach or side while unrestrained, or under other circumstances.

Electrostatic discharge outside the fuel tank can ignite fuel spills while refueling, posing a fire hazard.

The recalled children's pajamas fail to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The recalled handlebars can crack where the brake/shift levers are installed and cause a crash, posing an injury hazard.

The oven of the gas ranges can emit dangerous levels of carbon monoxide (CO) while in use, posing a serious risk of injury or death from carbon monoxide poisoning.

The glue on the inflatable paddle boards can separate at the seams and the paddle boards can deflate unexpectedly, posing a drowning hazard.

Improper installation of the retaining bolts could result in the parking brake mechanism failing to hold the vehicle when parked allowing the vehicle to move unintentionally, posing crash and injury hazards.

When the bedrail is attached, users can become entrapped within the bed rail or between the bed rail and the side of the mattress. This poses a serious entrapment hazard and risk of death by asphyxiation.

The washing machines can short-circuit and overheat, posing a fire hazard.

A young child can become entrapped by unzipping and entering the blanket, posing a risk of death by asphyxiation.

The bicycle's handlebar can become loose during use, posing a fall hazard.

The compressor head of the tankless diving system can fracture while in use resulting in restricted air flow, posing a drowning hazard for divers.

An incorrectly programmed CDI box can lead to engine failure, posing crash and injury hazards.

The mattresses fail to meet the mandatory federal flammability standard for mattresses, posing a fire hazard.

The temperature sensor can relay incorrect water temperatures and cause the water to be hotter than the set temperature, posing injury (heat stroke) and thermal burn hazards.

The packaging is not child resistant as required by the Poison Prevention Packaging Act. The tattoo numbing cream contains lidocaine, posing a risk of poisoning to young children if they ingest it.

The Rosso Motors eQuad X and eQuad Q youth model ATVs do not meet mandatory federal safety standards. The youth ATVs exceed the maximum speed limitations for vehicles intended for children ages 6 and older which poses a risk of high-speed crash. Additionally, for certain ATVs, the mechanical suspension fails to comply with the safety standard requirement. ATVs that fail to meet mandatory safety requirements pose a risk of serious injury or death to consumers.  The ATVs were also imported and distributed in the U.S. without a Consumer Product Safety Commission (CPSC)-approved ATV Action Plan, which includes safety requirements designed to protect users.

The ring and wire hanging mechanism can fail causing the mirror to detach and fall from the wall, posing injury and laceration hazards.

The awning and shutter motor's power cable can disconnect while opened or closed manually (using the manual override feature), posing electric shock and electrocution hazards.

The candles can burn at higher than usual temperatures causing the jars to break, posing fire and laceration injury hazards.


© 2023 Huguenot Fire Company Inc.